Blender Pump HSC130 Spare Parts

Part Overview

Blender Pump HSC130 stays tied to Blender Pump service and the exact model record.

The spare-parts notes for Blender Pump HSC130 are written around the documented model and the part group actually used on that unit.
The power end / rotating assembly view matters here because the fit decision usually starts where the wear path actually sits.
Why it matters: a matched spare part keeps service life and planned maintenance more predictable.

Scope note

Blender Pump HSC130 usually needs the seal and rotating set reviewed together.

Compatibility / Model Fit

Use the model, series, and sample check to confirm whether Blender Pump HSC130 is the right match.

Compatible model: compare the removed part with Blender Pump HSC130 before any quote is finalized.
Compatible series: use Blender Pump Series and the Rotating Assembly & Seal Package note as the search filter, then verify the sample and nameplate data.
Interchangeable models: Blender Pump HSC130 should wait for shaft size, seal chamber, and mounting layout to be checked.
Check the shaft size, seal chamber, and mounting layout on Blender Pump HSC130 before treating the part as a direct swap.

Compatibility reminders

Compatible models: Blender Pump HSC130 is the primary reference.
Compatible series: Blender Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: Blender Pump HSC130 should wait for shaft size, seal chamber, and mounting layout to be checked.
Partial compatibility: for Blender Pump HSC130, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

Use the category note to separate power end / rotating assembly items from the supporting hardware.

Part category: Rotating Assembly & Seal Package keeps Blender Pump HSC130 tied to the power end / rotating assembly service path.
The power end / rotating assembly interface is the first place to verify the fit path for this spare part on Blender Pump HSC130.
Wear part or non-wear part: confirm whether the item belongs to the wear path for Blender Pump HSC130 before the order is placed.
Priority path: start with the sealing and wear items for Blender Pump HSC130, then confirm the support pieces if needed.

Priority note

The replacement order for Blender Pump HSC130 usually starts with the wear items, then moves to the support hardware.

Material / Specification Notes

The specification note keeps the replacement request tied to the sample and the source record.

Size: use the removed part or nameplate data to lock the diameter, thread, or envelope before the order is placed.
Material: match the requested material to the working medium, wear level, and service environment.
Hardness / finish: use any supplied heat-treatment or surface-finish note as part of the replacement check.
Connection / interface: compare the flange, bolt pattern, fit point, and sealing path against the rotating interface before purchase.

Service note

Blender Pump HSC130 usually needs stable sealing, balanced rotation, and materials that support continuous mixing duty.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Blender Pump HSC130. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Blender Pump HSC130	-	-	-	Wear-resistant	-	-	Blender Pump HSC130

Common Replacement Set

Use the wear set and backup items as one planning unit for Blender Pump HSC130.

Wear items

mechanical seal
impeller
bearing
shaft sleeve
seal ring
gasket set

Support items

coupling sleeve
seal kit
fastener kit

These parts on Blender Pump HSC130 move through the same wear path, which is why they are often quoted together.
Review the sealing parts and backup hardware for Blender Pump HSC130 in the same maintenance pass as the wear items.
Use the replacement set for Blender Pump HSC130 as the starting point for the maintenance plan.

Maintenance planning

Blender Pump HSC130 usually needs the seal and rotating set reviewed together.

The spare-parts set for Blender Pump HSC130 is easier to plan when the wear items and support items are checked as one bundle.

Ordering Information

The order note keeps the request specific enough for the parts team to confirm the fit first.

Start with the model name and nameplate data for Blender Pump HSC130 so the parts team can avoid a wrong match.
State the part name and size for Blender Pump HSC130, and include an image if the old item can still be compared.
If you have them, send dimensions, material preferences, and a sample photo to keep the request aligned with Blender Pump HSC130 and the working medium and duty point.
Send Blender Pump HSC130's model name, shaft or seal details, and a clear photo of the old part if the fit needs confirmation.

Request checklist

For Blender Pump HSC130, send the model name, serial number, part name, photos, dimensions, and material request.

Inquiry & Support

Packing and technical confirmation for Blender Pump HSC130 should be settled after the model and material details are clear.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

The shipping plan only becomes useful after the model and material details are fixed for this Blender Pump part.

Packing for Blender Pump HSC130 can be arranged for export shipment according to the final order size and destination.
Delivery timing for Blender Pump HSC130 should be confirmed after the model, size, and material questions are settled.
Ask for technical confirmation for Blender Pump HSC130 before placing the order if the old sample or nameplate data is incomplete.

Related Parts

This related block keeps close spare-parts pages one step away for side-by-side comparison on Blender Pump HSC130.

Parts on the same unit

mechanical sealimpellerbearingshaft sleeveseal ringgasket set

Related support items

coupling sleeveseal kitfastener kit

Series-level spare parts

Next Pages

Keep the Blender Pump Series spare-parts path connected to the model, series, and support pages.

Model