Model Detail
SeriesBlender Pump Series ModelBlender-Pump-HSC130
Blender Pump HSC130
Blender Pump HSC130: HSC130 blender pump is a large-flow centrifugal pump for high-capacity blender units, supporting continuous sand mixing and...
Product Overview
Blender Pump HSC130 is described from the source introduction, technical data, and operating notes.
HSC130 blender pump is a large-flow centrifugal pump for high-capacity blender units, supporting continuous sand mixing and large-displacement fracturing fluid preparation.
The technical description also points to stable long-run operation.
The specification rows also give a second check through Rated Power is listed as 110 kW and Pump Stage is listed as Single Stage.
Model Focus
- Series family: Blender Pump Series
- Model record: keep the page tied to the supplied table and series page.
- Configuration: confirm the installation envelope before release.
- Primary use: confirm the duty point, medium, and service window.
- Feature focus: stable long-run operation
Key Structural Features
The feature text for Blender Pump HSC130 highlights stable long-run operation.
The source material focuses on stable long-run operation.
Stable long-run operation means Blender Pump HSC130 is better suited to repeated cycles and longer service windows.
Those source notes keep Blender Pump HSC130 tied to Large-flow impeller and volute, wear-resistant wet end, and mechanical seal instead of generic wording.
Reading the structure alongside Rated Power is listed as 110 kW and Pump Stage is listed as Single Stage keeps the page closer to the source file.
- Large-flow impeller and volute
- wear-resistant wet end
- mechanical seal
- heavy-duty base
- suitable for long-time continuous operation.
What the layout emphasizes
- Theme focus: stable long-run operation
- Feature note: Large-flow impeller and volute
- Feature note: wear-resistant wet end
Application Areas
The application section for Blender Pump HSC130 stays within the supplied material.
HSC130 blender pump is a large-flow centrifugal pump for high-capacity blender units, supporting continuous sand mixing and large-displacement fracturing fluid preparation.
No explicit application list was extracted for Blender Pump HSC130, so the page stays close to the source wording.
The application note can be checked against Rated Power = 110 kW and Pump Stage = Single Stage to keep the page grounded in the table.
Service focus
- Service scope: Blender Pump Series
Selection / Configuration Notes
The final selection for Blender Pump HSC130 depends on continuous feed, mixing stability, and skid fit.
The structural notes for Blender Pump HSC130 point to stable long-run operation, so the selected package should preserve the same setup.
The specification rows for Blender Pump HSC130 make the final package easier to validate through Rated Power = 110 kW and Pump Stage = Single Stage.
The model becomes easier to place when the selection notes are read against Rated Power is listed as 110 kW, Pump Stage is listed as Single Stage, and Structural Form is listed as Horizontal Centrifugal Pump.
The model choice for Blender Pump HSC130 should be checked against the series family and the available operating data before quotation.
Before ordering
- Confirm the duty point against the table and the skid path for Blender Pump HSC130.
- Review the skid layout, feed rate, and mixing stability together.
- Verify the blending medium and layout path against the table.
- Series family: Blender Pump Series
- Rated Power: 110 kW
- Pump Stage: Single Stage
Practical Model Check
Blender Pump Series should be read together with the table and the duty point.
Send the model name, duty point, and installation constraints for Blender Pump HSC130 so the fit check stays specific.
The family may stay close, but the final model should change if the skid layout is off.
Quick check
- Series family: Blender Pump Series
- Selection focus: continuous feed, mixing stability, and skid fit
- Use the parameter table before quotation and keep the skid path visible.
- Confirm the blend medium, duty cycle, and skid path.
Product Parameters
| Main Technical Specifications | |
|---|---|
| Rated Power | 110 kW |
| Pump Stage | Single Stage |
| Structural Form | Horizontal Centrifugal Pump |
| Applicable Medium | Clean Water, Low-concentration Sand Slurry, Fracturing Fluid |
Operating Parameters
| Parameter Item | Technical Data |
|---|---|
| Max Working Pressure | 1.6 MPa |
| Rated Displacement | 130 m³/h |
| Rated Rotating Speed | 2900 r/min |
| Operating Temperature Range | -20℃ ~ 80℃ |
| Continuous Operating Time | ≥72 h |
Inquiry Path
Reduce friction and keep the CTA visible.
Send the model name, duty point, and installation constraints for Blender Pump HSC130 so the fit check stays specific.
Contact
PHONE:+86-13062870081
EMAIL:sales@sjpetroleummachinery.com
ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China
Related Models
Keep the comparison close to this model family.
Next Pages
Move from the exact Blender Pump Series model to the pages that support the buying decision.
Series
Blender Pump Series
Go back to the blender family and compare sibling model tables.
Open seriesSpare Parts
Blender Pump HSC130 spare parts
Open the blender spare-parts path for skid-mounted service items.
Open spare partsGuide
Selection Guide
Use this guide when skid fit, feed rate, and mixing stability still need a final check.
Open guideGuide
FAQ
Use the quick answers when the inquiry needs a fast first pass on blender fit.
Open guide