Blender Pump HSQ100 Spare Parts

Part Overview

The page introduction keeps the power end / rotating assembly service context visible for Blender Pump HSQ100.

The spare-parts notes for Blender Pump HSQ100 are written around the documented model and the part group actually used on that unit.
The page gives the power end / rotating assembly path priority so the buyer can compare the part against the correct machine side.
Why it matters: a wrong part can change sealing behavior, wear life, and the next maintenance window.

Scope note

Blender Pump HSQ100 usually needs the seal and rotating set reviewed together.

Compatibility / Model Fit

Blender Pump Series helps narrow the fit check, but the final match still depends on the sample and dimensions.

Compatible model: compare the removed part with Blender Pump HSQ100 before any quote is finalized.
Compatible series: Blender Pump Series helps narrow the family, but the final size check still has to match the part in hand.
Interchangeable models: Blender Pump HSQ100 should wait for shaft size, seal chamber, and mounting layout to be checked.
Check the shaft size, seal chamber, and mounting layout on Blender Pump HSQ100 before treating the part as a direct swap.

Compatibility reminders

Compatible models: Blender Pump HSQ100 is the primary reference.
Compatible series: Blender Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: Blender Pump HSQ100 should wait for shaft size, seal chamber, and mounting layout to be checked.
Partial compatibility: for Blender Pump HSQ100, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

This section keeps the replacement path grouped by wear role instead of by generic catalog labels.

Part category: this Rotating Assembly & Seal Package label helps separate the active wear set from the support hardware on Blender Pump HSQ100.
The power end / rotating assembly interface is the first place to verify the fit path for this spare part on Blender Pump HSQ100.
Wear part or non-wear part: the order should separate consumable wear items from supporting hardware on Blender Pump HSQ100.
Priority path: High for sealing and wear items on Blender Pump HSQ100; medium for support hardware and backups. for Blender Pump HSQ100.

Priority note

On Blender Pump HSQ100, the seal and wear path normally deserves the first review before backup parts are added.

Material / Specification Notes

The specification note keeps the replacement request tied to the sample and the source record.

Size: the dimensions should be checked from the sample, drawing, or source document rather than assumed from the model name alone.
Material: keep the replacement material aligned with the medium, wear load, and expected service window.
Hardness / finish: if the source material gives a hardness or finish value, keep that detail tied to the spare-part request.
Connection / interface: compare the flange, bolt pattern, fit point, and sealing path against the rotating interface before purchase.

Service note

Blender Pump HSQ100 usually needs stable sealing, balanced rotation, and materials that support continuous mixing duty.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Blender Pump HSQ100. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Blender Pump HSQ100	-	-	-	Corrosion-resistant	-	-	Blender Pump HSQ100

Common Replacement Set

This section helps buyers plan the spare-parts order as a service set, not a loose item list.

Wear items

mechanical seal
impeller
bearing
shaft sleeve
seal ring
gasket set

Support items

coupling sleeve
seal kit
fastener kit

For Blender Pump HSQ100, mechanical seal and impeller are often requested together because they share the same wear path.
Keep the sealing parts, wear parts, and backup hardware for Blender Pump HSQ100 in one service check.
Use the replacement set for Blender Pump HSQ100 as the starting point for the maintenance plan.

Maintenance planning

Blender Pump HSQ100 usually needs the seal and rotating set reviewed together.

When ordering parts for Blender Pump HSQ100, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The inquiry should include the model, size, and sample evidence before quotation starts.

Start with the model name and nameplate data for Blender Pump HSQ100 so the parts team can avoid a wrong match.
Add the part name, dimensions, and a clear photo of the removed item for Blender Pump HSQ100 if possible.
If available, add dimensions, material requests, and a sample photo of the removed part for Blender Pump HSQ100 and the working medium and duty point.
Send Blender Pump HSQ100's model name, shaft or seal details, and a clear photo of the old part if the fit needs confirmation.

Request checklist

When the part for Blender Pump HSQ100 is tied to the working duty point, add the measured sample and any material note at the same time.

Inquiry & Support

Packing and technical confirmation for Blender Pump HSQ100 should be settled after the model and material details are clear.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

Packing and delivery for Blender Pump HSQ100 should wait until the model, size, and material points are clear.

Export packing for Blender Pump HSQ100 can be matched to the final order size after the part details are locked in.
Delivery timing for Blender Pump HSQ100 is best fixed only after the model, size, and material points are clear.
If the old sample or nameplate data for Blender Pump HSQ100 is incomplete, ask for technical confirmation before the order is placed.

Related Parts

This related block keeps close spare-parts pages one step away for side-by-side comparison on Blender Pump HSQ100.

Parts on the same unit

mechanical sealimpellerbearingshaft sleeveseal ringgasket set

Related support items

coupling sleeveseal kitfastener kit

Series-level spare parts

Next Pages

Keep the Blender Pump Series spare-parts path connected to the model, series, and support pages.

Model