Blender Pump HST130 Spare Parts

Part Overview

The opening note keeps Blender Pump HST130 aligned with the documented Blender Pump replacement path.

Blender Pump HST130 uses the same source file, model family, and inquiry path, which keeps the spare-part review anchored to the right pump.
The power end / rotating assembly view matters here because the fit decision usually starts where the wear path actually sits.
Why it matters: a wrong part can change sealing behavior, wear life, and the next maintenance window.

Scope note

Blender Pump HST130 usually needs the seal and rotating set reviewed together.

Compatibility / Model Fit

The fit review stays focused on Blender Pump HST130, the removed part, and the actual interface points.

Compatible model: start with Blender Pump HST130 and confirm the removed sample against the source record before ordering.
Compatible series: use Blender Pump Series and the Rotating Assembly & Seal Package note as the search filter, then verify the sample and nameplate data.
Interchangeable models: on Blender Pump HST130, the fit decision depends on the rotating interface and seal chamber, not the family name alone.
Check the shaft size, seal chamber, and mounting layout on Blender Pump HST130 before treating the part as a direct swap.

Compatibility reminders

Compatible models: Blender Pump HST130 is the primary reference.
Compatible series: Blender Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: on Blender Pump HST130, the fit decision depends on the rotating interface and seal chamber, not the family name alone.
Partial compatibility: for Blender Pump HST130, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

Use the category note to separate power end / rotating assembly items from the supporting hardware.

Part category: Rotating Assembly & Seal Package keeps Blender Pump HST130 tied to the power end / rotating assembly service path.
Use the power end / rotating assembly side of the machine as the main reference for the replacement check on Blender Pump HST130.
Wear part or non-wear part: the order should separate consumable wear items from supporting hardware on Blender Pump HST130.
Priority path: start with the sealing and wear items for Blender Pump HST130, then confirm the support pieces if needed.

Priority note

The replacement order for Blender Pump HST130 usually starts with the wear items, then moves to the support hardware.

Material / Specification Notes

Size, material, finish, and interface details should stay visible for Blender Pump HST130.

Size: use the removed part or nameplate data to lock the diameter, thread, or envelope before the order is placed.
Material: match the requested material to the working medium, wear level, and service environment.
Hardness / finish: use any supplied heat-treatment or surface-finish note as part of the replacement check.
Connection / interface: compare the flange, bolt pattern, fit point, and sealing path against the rotating interface before purchase.

Service note

Blender Pump HST130 usually needs stable sealing, balanced rotation, and materials that support continuous mixing duty.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Blender Pump HST130. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Blender Pump HST130	-	-	-	Wear-resistant	-	-	Blender Pump HST130
Bearing Package	Blender Pump HST130	-	-	-	Wear-resistant	-	-	Blender Pump HST130

Common Replacement Set

This section helps buyers plan the spare-parts order as a service set, not a loose item list.

Wear items

mechanical seal
impeller
bearing
shaft sleeve
seal ring
gasket set

Support items

coupling sleeve
seal kit
fastener kit

These parts on Blender Pump HST130 move through the same wear path, which is why they are often quoted together.
Review the sealing parts and backup hardware for Blender Pump HST130 in the same maintenance pass as the wear items.
Use the replacement set for Blender Pump HST130 as the starting point for the maintenance plan.

Maintenance planning

Blender Pump HST130 usually needs the seal and rotating set reviewed together.

When ordering parts for Blender Pump HST130, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The inquiry should include the model, size, and sample evidence before quotation starts.

Start with the model name and nameplate data for Blender Pump HST130 so the parts team can avoid a wrong match.
Add the part name, dimensions, and a clear photo of the removed item for Blender Pump HST130 if possible.
If you have them, send dimensions, material preferences, and a sample photo to keep the request aligned with Blender Pump HST130 and the working medium and duty point.
Send Blender Pump HST130's model name, shaft or seal details, and a clear photo of the old part if the fit needs confirmation.

Request checklist

When the part for Blender Pump HST130 is tied to the working duty point, add the measured sample and any material note at the same time.

Inquiry & Support

This support block keeps the shipping path tied to Blender Pump HST130 instead of a generic family label.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

The shipping plan only becomes useful after the model and material details are fixed for this Blender Pump part.

Packing for Blender Pump HST130 can be adjusted to the order size and shipping route once the replacement set is confirmed.
Delivery timing for Blender Pump HST130 should be confirmed after the model, size, and material questions are settled.
Ask for technical confirmation for Blender Pump HST130 before placing the order if the old sample or nameplate data is incomplete.

Related Parts

Related pages help the buyer check sibling models inside the same branch without losing the current model reference.

Parts on the same unit

mechanical sealimpellerbearingshaft sleeveseal ringgasket set

Related support items

coupling sleeveseal kitfastener kit

Series-level spare parts

Next Pages

Keep the Blender Pump Series spare-parts path connected to the model, series, and support pages.

Model