Plunger Pump KTZ2000 Spare Parts

Part Overview

The page introduction keeps the fluid end service context visible for Plunger Pump KTZ2000.

Plunger Pump KTZ2000 stays on the same model record as the main product page, so the buyer can keep the spare-part check tied to the exact unit.
The fluid end view matters here because the fit decision usually starts where the wear path actually sits.
Why it matters: plunger size, sealing, and pressure retention depend on the correct plunger part.

Scope note

Plunger Pump KTZ2000 needs the wear kit checked against the exact size and duty point on the removed sample.

Compatibility / Model Fit

Use the model, series, and sample check to confirm whether Plunger Pump KTZ2000 is the right match.

Compatible model: Plunger Pump KTZ2000 is the first reference point for the fit check, not the generic family name.
Compatible series: Plunger Pump Series helps narrow the family, but the final size check still has to match the part in hand.
Interchangeable models: a plunger or piston swap on Plunger Pump KTZ2000 still needs the fluid-end layout and size to line up with the sample.
Check pressure class, plunger size, and fluid-end layout on Plunger Pump KTZ2000 before assuming partial interchangeability.

Compatibility reminders

Compatible models: Plunger Pump KTZ2000 is the primary reference.
Compatible series: Plunger Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: a plunger or piston swap on Plunger Pump KTZ2000 still needs the fluid-end layout and size to line up with the sample.
Partial compatibility: for Plunger Pump KTZ2000, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

This section keeps the replacement path grouped by wear role instead of by generic catalog labels.

Part category: Fluid End Wear Package keeps Plunger Pump KTZ2000 tied to the fluid end service path.
Use the fluid end side of the machine as the main reference for the replacement check on Plunger Pump KTZ2000.
Wear part or non-wear part: the order should separate consumable wear items from supporting hardware on Plunger Pump KTZ2000.
Priority path: High for sealing and wear items on Plunger Pump KTZ2000; medium for support hardware and backups. for Plunger Pump KTZ2000.

Priority note

On Plunger Pump KTZ2000, the seal and wear path normally deserves the first review before backup parts are added.

Material / Specification Notes

This section keeps the material and fit details close to the spare-part order path.

Size: confirm the exact size, bore, thread, or envelope from the removed sample or the source document.
Material: keep the replacement material aligned with the medium, wear load, and expected service window.
Hardness / finish: if the source material gives a hardness or finish value, keep that detail tied to the spare-part request.
Connection / interface: confirm flange face, bolt pattern, shaft fit, sealing groove, or fluid-end interface before purchase.
Power context: the 2,000 hp rating is part of the fit record and can affect how the replacement set is read.
Configuration context: reciprocating, positive-displacement, single-acting, horizontal three-cylinder plunger pump can affect the fit path and installation interface.

Service note

Plunger Pump KTZ2000 depends on wear resistance, sealing stability, and dimensional fit at the fluid end.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Plunger Pump KTZ2000. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Plunger Pump KTZ2000	-	89.76" x 59.76" x 44.33"	Power: 2000 hp (1491 kW); Strokes: 330 rpm; Rod load: 1000KN; Stroke: 8" (203 mm); Gear ratio: 6.278: 1	Alloy steel	-	-	Plunger Pump KTZ2000
Plunger (4")	Plunger Pump KTZ2000	-	4"	-	-	-	-	Plunger Pump KTZ2000
Plunger (4.5")	Plunger Pump KTZ2000	-	4.5"	-	-	-	-	Plunger Pump KTZ2000
Plunger (5")	Plunger Pump KTZ2000	-	5"	-	-	-	-	Plunger Pump KTZ2000
Plunger (5.5")	Plunger Pump KTZ2000	-	5.5"	-	-	-	-	Plunger Pump KTZ2000
Plunger	Plunger Pump KTZ2000	-	4" / 4.5" / 5" / 5.5"	The connection between the plunger and the small connecting rod uses clamp connections, making...	Alloy steel	-	The connection between the plunger and the small connecting rod uses...	Plunger Pump KTZ2000
Bearing Package	Plunger Pump KTZ2000	-	-	-	Alloy steel	-	-	Plunger Pump KTZ2000
Tie Rods	Plunger Pump KTZ2000	-	-	12 tie rods	Alloy steel	-	-	Plunger Pump KTZ2000

Common Replacement Set

Use the wear set and backup items as one planning unit for Plunger Pump KTZ2000.

Wear items

plunger
liner
packing set
valve seat
valve insert
gasket kit

Support items

seal kit
fastener kit
guide sleeve

For Plunger Pump KTZ2000, plunger and liner are often requested together because they share the same wear path.
Check the sealing parts, wear parts, and backup hardware for Plunger Pump KTZ2000 together before the order is closed.
Plan the maintenance window around the replacement set for Plunger Pump KTZ2000 rather than a single isolated item.

Maintenance planning

Plunger Pump KTZ2000 needs the wear kit checked against the exact size and duty point on the removed sample.

When ordering parts for Plunger Pump KTZ2000, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The inquiry should include the model, size, and sample evidence before quotation starts.

The model name and any nameplate data should be the first line of the inquiry for Plunger Pump KTZ2000.
Add the part name, size, and a photo for Plunger Pump KTZ2000 if the old part is still available.
If available, add dimensions, material requests, and a sample photo of the removed part for Plunger Pump KTZ2000 and intermittent oil well operations such as acidizing, fracturing, and well killing.
Send Plunger Pump KTZ2000's model name, serial number, plunger size, pressure window, and medium condition before quoting the parts.

Request checklist

The parts team can work faster on Plunger Pump KTZ2000 when the model, serial number, part name, sealing detail, photos, dimensions, and material note are sent together.

Inquiry & Support

Packing and technical confirmation for Plunger Pump KTZ2000 should be settled after the model and material details are clear.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

The shipping plan only becomes useful after the size and material details are fixed for this plunger part.

Packing for Plunger Pump KTZ2000 can be arranged for export shipment according to the final order size and destination.
Delivery timing for Plunger Pump KTZ2000 should be confirmed after the model, size, and material questions are settled.
If the old sample or nameplate data for Plunger Pump KTZ2000 is incomplete, ask for technical confirmation before the order is placed.

Related Parts

Related pages help the buyer check sibling models inside the same branch without losing the current model reference.

Parts on the same unit

plungerlinerpacking setvalve seatvalve insertgasket kit

Related support items

seal kitfastener kitguide sleeve

Series-level spare parts

Next Pages

Keep the Plunger Pump Series spare-parts path connected to the model, series, and support pages.

Model