Spare Parts

Plunger Pump KTZ1000 spare parts

Use this page to narrow the spare-parts request around oil well operations such as acidizing, fracturing, and well killing and the model details already recorded for Plunger Pump KTZ1000.

Request Spare Parts View Model Page Open Series Page

FamilyPlunger / Piston Pump

CategoryFluid End Wear Package

ModelPlunger Pump KTZ1000

SeriesPlunger Pump Series

Power Ref1,000 hp

Configreciprocating, positive-displacement, single-acting, horizontal three-cylinder plunger pump

Part Overview

The opening note keeps Plunger Pump KTZ1000 aligned with the documented Plunger / Piston Pump replacement path.

The spare-parts notes for Plunger Pump KTZ1000 are written around the documented model and the part group actually used on that unit.
The page gives the fluid end path priority so the buyer can compare the part against the correct machine side.
Why it matters: plunger size, sealing, and pressure retention depend on the correct plunger part.

Scope note

Plunger Pump KTZ1000 needs the wear kit checked against the exact size and duty point on the removed sample.

Compatibility / Model Fit

Use the model, series, and sample check to confirm whether Plunger Pump KTZ1000 is the right match.

Compatible model: Plunger Pump KTZ1000 is the first reference point for the fit check, not the generic family name.
Compatible series: use Plunger Pump Series and the Fluid End Wear Package note as the search filter, then verify the sample and nameplate data.
Interchangeable models: for Plunger Pump KTZ1000, the final call depends on size, pressure window, and the fluid-end path.
Check pressure class, plunger size, and fluid-end layout on Plunger Pump KTZ1000 before assuming partial interchangeability.

Compatibility reminders

Compatible models: Plunger Pump KTZ1000 is the primary reference.
Compatible series: Plunger Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: for Plunger Pump KTZ1000, the final call depends on size, pressure window, and the fluid-end path.
Partial compatibility: for Plunger Pump KTZ1000, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

The category note helps the buyer decide whether the item is a wear part or a support part.

Part category: use Fluid End Wear Package to keep the replacement path aligned with Plunger Pump Series and Plunger Pump KTZ1000.
Use the fluid end side of the machine as the main reference for the replacement check on Plunger Pump KTZ1000.
Wear part or non-wear part: confirm whether the item belongs to the wear path for Plunger Pump KTZ1000 before the order is placed.
Priority path: start with the sealing and wear items for Plunger Pump KTZ1000, then confirm the support pieces if needed.

Priority note

For Plunger Pump KTZ1000 in Plunger / Piston Pump, the wear package usually gets checked first because it affects sealing and service life.

Material / Specification Notes

The specification note keeps the replacement request tied to the sample and the source record.

Size: the dimensions should be checked from the sample, drawing, or source document rather than assumed from the model name alone.
Material: the material choice should follow the duty condition, not just the visible part shape.
Hardness / finish: if a hardness value, surface finish, or heat treatment is supplied, keep it aligned with the replacement order.
Connection / interface: confirm flange face, bolt pattern, shaft fit, sealing groove, or fluid-end interface before purchase.
Power context: 1,000 hp sits in the model record and should stay aligned with the parts request.
Configuration context: reciprocating, positive-displacement, single-acting, horizontal three-cylinder plunger pump can affect the fit path and installation interface.

Service note

Plunger Pump KTZ1000 depends on wear resistance, sealing stability, and dimensional fit at the fluid end.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Plunger Pump KTZ1000. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Plunger Pump KTZ1000	-	79.21" x 55.51" x 40"	Power: 1000 hp (750 kW); Strokes: 300 rpm; Rod load: 592KN; Stroke: 8" (203 mm); Gear ratio: 5.04:1	Alloy steel	-	-	Plunger Pump KTZ1000
Plunger (3.75")	Plunger Pump KTZ1000	-	3.75"	-	-	-	-	Plunger Pump KTZ1000
Plunger (4")	Plunger Pump KTZ1000	-	4"	-	-	-	-	Plunger Pump KTZ1000
Plunger (4.5")	Plunger Pump KTZ1000	-	4.5"	-	-	-	-	Plunger Pump KTZ1000
Plunger (5")	Plunger Pump KTZ1000	-	5"	-	-	-	-	Plunger Pump KTZ1000
Plunger	Plunger Pump KTZ1000	-	3.75" / 4" / 4.5" / 5"	The connection between the plunger and the crosshead uses threaded connections, making...	Alloy steel	-	The connection between the plunger and the crosshead uses threaded...	Plunger Pump KTZ1000
Tie Rods	Plunger Pump KTZ1000	-	-	8 tie rods	Alloy steel	-	-	Plunger Pump KTZ1000

Common Replacement Set

This section helps buyers plan the spare-parts order as a service set, not a loose item list.

Wear items

plunger
liner
packing set
valve seat
valve insert
gasket kit

Support items

seal kit
fastener kit
guide sleeve

The wear path on Plunger Pump KTZ1000 usually links the main wear items, so they are often checked as a set.
Keep the sealing parts, wear parts, and backup hardware for Plunger Pump KTZ1000 in one service check.
Use the replacement set for Plunger Pump KTZ1000 as the base for maintenance planning.

Maintenance planning

Plunger Pump KTZ1000 needs the wear kit checked against the exact size and duty point on the removed sample.

When ordering parts for Plunger Pump KTZ1000, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The order note keeps the request specific enough for the parts team to confirm the fit first.

Start with the model name and nameplate data for Plunger Pump KTZ1000 so the parts team can avoid a wrong match.
Add the part name, dimensions, and a clear photo of the removed item for Plunger Pump KTZ1000 if possible.
If available, add dimensions, material notes, and a sample photo so the request stays tied to Plunger Pump KTZ1000 and oil well operations such as acidizing, fracturing, and well killing.
Send Plunger Pump KTZ1000's model name, serial number, plunger size, pressure window, and medium condition before quoting the parts.

Request checklist

When the part for Plunger Pump KTZ1000 is tied to oil well operations such as acidizing, fracturing, and well killing, add the measured sample and any plunger-size or pressure note at the same time.

Inquiry & Support

This support block keeps the shipping path tied to Plunger Pump KTZ1000 instead of a generic family label.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

Once the fit questions are settled, the shipment plan can be matched to Plunger Pump KTZ1000's pump-end parts set.

Packing for Plunger Pump KTZ1000 can be adjusted to the order size and shipping route once the replacement set is confirmed.
The delivery window for Plunger Pump KTZ1000 should be finalized after the fit and material questions are answered.
When the sample or nameplate data for Plunger Pump KTZ1000 is incomplete, technical confirmation should happen before purchase.

Related Parts

This related block keeps close spare-parts pages one step away for side-by-side comparison on Plunger Pump KTZ1000.

Parts on the same unit

plungerlinerpacking setvalve seatvalve insertgasket kit

Related support items

seal kitfastener kitguide sleeve

Series-level spare parts

Keep the Plunger Pump Series spare-parts path connected to the model, series, and support pages.

Model