Blender Pump HSC100 Spare Parts

Part Overview

The opening note keeps Blender Pump HSC100 aligned with the documented Blender Pump replacement path.

Blender Pump HSC100 stays on the same model record as the main product page, so the buyer can keep the spare-part check tied to the exact unit.
This page keeps the power end / rotating assembly side visible because that is the area most buyers check first when a part needs replacement.
Why it matters: a wrong part can change sealing behavior, wear life, and the next maintenance window.

Scope note

Blender Pump HSC100 usually needs the seal and rotating set reviewed together.

Compatibility / Model Fit

Blender Pump Series helps narrow the fit check, but the final match still depends on the sample and dimensions.

Compatible model: start with Blender Pump HSC100 and confirm the removed sample against the source record before ordering.
Compatible series: use Blender Pump Series and the Rotating Assembly & Seal Package note as the search filter, then verify the sample and nameplate data.
Interchangeable models: Blender Pump HSC100 should wait for shaft size, seal chamber, and mounting layout to be checked.
Check the shaft size, seal chamber, and mounting layout on Blender Pump HSC100 before treating the part as a direct swap.

Compatibility reminders

Compatible models: Blender Pump HSC100 is the primary reference.
Compatible series: Blender Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: Blender Pump HSC100 should wait for shaft size, seal chamber, and mounting layout to be checked.
Partial compatibility: for Blender Pump HSC100, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

The category note helps the buyer decide whether the item is a wear part or a support part.

Part category: use Rotating Assembly & Seal Package to keep the replacement path aligned with Blender Pump Series and Blender Pump HSC100.
Use the power end / rotating assembly side of the machine as the main reference for the replacement check on Blender Pump HSC100.
Wear part or non-wear part: the order should separate consumable wear items from supporting hardware on Blender Pump HSC100.
Priority path: High for sealing and wear items on Blender Pump HSC100; medium for support hardware and backups. for Blender Pump HSC100.

Priority note

On Blender Pump HSC100, the seal and wear path normally deserves the first review before backup parts are added.

Material / Specification Notes

Size, material, finish, and interface details should stay visible for Blender Pump HSC100.

Size: use the removed part or nameplate data to lock the diameter, thread, or envelope before the order is placed.
Material: keep the replacement material aligned with the medium, wear load, and expected service window.
Hardness / finish: if a hardness value, surface finish, or heat treatment is supplied, keep it aligned with the replacement order.
Connection / interface: compare the flange, bolt pattern, fit point, and sealing path against the rotating interface before purchase.

Service note

Blender Pump HSC100 usually needs stable sealing, balanced rotation, and materials that support continuous mixing duty.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Blender Pump HSC100. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Blender Pump HSC100	-	-	-	Corrosion-resistant	-	-	Blender Pump HSC100

Common Replacement Set

This section helps buyers plan the spare-parts order as a service set, not a loose item list.

Wear items

mechanical seal
impeller
bearing
shaft sleeve
seal ring
gasket set

Support items

coupling sleeve
seal kit
fastener kit

For Blender Pump HSC100, mechanical seal and impeller are often requested together because they share the same wear path.
Check the sealing parts, wear parts, and backup hardware for Blender Pump HSC100 together before the order is closed.
Use the replacement set for Blender Pump HSC100 as the starting point for the maintenance plan.

Maintenance planning

Blender Pump HSC100 usually needs the seal and rotating set reviewed together.

When ordering parts for Blender Pump HSC100, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The order note keeps the request specific enough for the parts team to confirm the fit first.

Start with the model name and nameplate data for Blender Pump HSC100 so the parts team can avoid a wrong match.
State the part name and size for Blender Pump HSC100, and include an image if the old item can still be compared.
If you have them, send dimensions, material preferences, and a sample photo to keep the request aligned with Blender Pump HSC100 and clean water supply, liquid circulation, and low-concentration sand slurry delivery during fracturing operations.
Send Blender Pump HSC100's model name, shaft or seal details, and a clear photo of the old part if the fit needs confirmation.

Request checklist

When the part for Blender Pump HSC100 is tied to clean water supply, liquid circulation, and low-concentration sand slurry delivery during fracturing operations, add the measured sample and any material note at the same time.

Inquiry & Support

The support note closes the inquiry for Blender Pump HSC100 without leaving shipping or confirmation questions open.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

The shipping plan only becomes useful after the model and material details are fixed for this Blender Pump part.

Packing for Blender Pump HSC100 can be arranged for export shipment according to the final order size and destination.
Delivery timing for Blender Pump HSC100 should be confirmed after the model, size, and material questions are settled.
Ask for technical confirmation for Blender Pump HSC100 before placing the order if the old sample or nameplate data is incomplete.

Related Parts

Use nearby spare-parts pages to compare Blender Pump HSC100 with close family matches before ordering.

Parts on the same unit

mechanical sealimpellerbearingshaft sleeveseal ringgasket set

Related support items

coupling sleeveseal kitfastener kit

Series-level spare parts

Next Pages

Keep the Blender Pump Series spare-parts path connected to the model, series, and support pages.

Model