Spare Parts

Plunger Pump KQZ1000 spare parts

Use this page to narrow the spare-parts request around intermittent oil well operations such as acidizing, cementing, and fracturing and the model details already recorded for Plunger Pump KQZ1000.

Request Spare Parts View Model Page Open Series Page

FamilyPlunger / Piston Pump

CategoryFluid End Wear Package

ModelPlunger Pump KQZ1000

SeriesPlunger Pump Series

Power Ref1,000 hp

Configreciprocating, positive-displacement, single-acting, horizontal five-cylinder plunger pump

Part Overview

Plunger Pump KQZ1000 stays tied to Plunger / Piston Pump service and the exact model record.

The spare-parts notes for Plunger Pump KQZ1000 are written around the documented model and the part group actually used on that unit.
This page keeps the fluid end side visible because that is the area most buyers check first when a part needs replacement.
Why it matters: a plunger replacement only works when the size and pressure path are matched.

Scope note

Plunger Pump KQZ1000 needs the wear kit checked against the exact size and duty point on the removed sample.

Compatibility / Model Fit

The fit review stays focused on Plunger Pump KQZ1000, the removed part, and the actual interface points.

Compatible model: start with Plunger Pump KQZ1000 and confirm the removed sample against the source record before ordering.
Compatible series: use Plunger Pump Series and the Fluid End Wear Package note as the search filter, then verify the sample and nameplate data.
Interchangeable models: plunger and piston parts for Plunger Pump KQZ1000 must be checked for plunger size, fluid-end layout, and pressure class before reuse.
Check pressure class, plunger size, and fluid-end layout on Plunger Pump KQZ1000 before assuming partial interchangeability.

Compatibility reminders

Compatible models: Plunger Pump KQZ1000 is the primary reference.
Compatible series: Plunger Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: plunger and piston parts for Plunger Pump KQZ1000 must be checked for plunger size, fluid-end layout, and pressure class before reuse.
Partial compatibility: for Plunger Pump KQZ1000, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

Use the category note to separate fluid end items from the supporting hardware.

Part category: this Fluid End Wear Package label helps separate the active wear set from the support hardware on Plunger Pump KQZ1000.
Use the fluid end side of the machine as the main reference for the replacement check on Plunger Pump KQZ1000.
Wear part or non-wear part: confirm whether the item belongs to the wear path for Plunger Pump KQZ1000 before the order is placed.
Priority path: start with the sealing and wear items for Plunger Pump KQZ1000, then confirm the support pieces if needed.

Priority note

On Plunger Pump KQZ1000, the seal and wear path normally deserves the first review before backup parts are added.

Material / Specification Notes

This section keeps the material and fit details close to the spare-part order path.

Size: the dimensions should be checked from the sample, drawing, or source document rather than assumed from the model name alone.
Material: keep the replacement material aligned with the medium, wear load, and expected service window.
Hardness / finish: if the source material gives a hardness or finish value, keep that detail tied to the spare-part request.
Connection / interface: confirm flange face, bolt pattern, shaft fit, sealing groove, or fluid-end interface before purchase.
Power context: the 1,000 hp rating is part of the fit record and can affect how the replacement set is read.
Configuration context: the documented reciprocating, positive-displacement, single-acting, horizontal five-cylinder plunger pump layout can change the way the part is installed.

Service note

Plunger Pump KQZ1000 depends on wear resistance, sealing stability, and dimensional fit at the fluid end.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Plunger Pump KQZ1000. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Plunger Pump KQZ1000	-	50" x 73" x 23.98"	Power: 1000 hp (2088 kW); Strokes: 450 rpm; Rod load: 472KN; Stroke: 6" (152.4 mm); Gear ratio: 4.61: 1	-	-	-	Plunger Pump KQZ1000
Gearbox Assembly	Plunger Pump KQZ1000	-	-	External gearbox; 16 installation positions	-	-	Left or right side	Plunger Pump KQZ1000
Plunger (3")	Plunger Pump KQZ1000	-	3"	-	-	-	-	Plunger Pump KQZ1000
Plunger (3.5")	Plunger Pump KQZ1000	-	3.5"	-	-	-	-	Plunger Pump KQZ1000
Plunger (4")	Plunger Pump KQZ1000	-	4"	-	-	-	-	Plunger Pump KQZ1000
Plunger (4.5")	Plunger Pump KQZ1000	-	4.5"	-	-	-	-	Plunger Pump KQZ1000
Plunger	Plunger Pump KQZ1000	-	3" / 3.5" / 4" / 4.5"	Offers two different pump head bodies to accommodate four different sizes of plungers (3",	-	-	-	Plunger Pump KQZ1000

Common Replacement Set

Use the wear set and backup items as one planning unit for Plunger Pump KQZ1000.

Wear items

plunger
liner
packing set
valve seat
valve insert
gasket kit

Support items

seal kit
fastener kit
guide sleeve

These parts on Plunger Pump KQZ1000 move through the same wear path, which is why they are often quoted together.
Review the sealing parts and backup hardware for Plunger Pump KQZ1000 in the same maintenance pass as the wear items.
Use the replacement set for Plunger Pump KQZ1000 as the starting point for the maintenance plan.

Maintenance planning

Plunger Pump KQZ1000 needs the wear kit checked against the exact size and duty point on the removed sample.

The spare-parts set for Plunger Pump KQZ1000 is easier to plan when the wear items and support items are checked as one bundle.

Ordering Information

Send enough detail to match the sample, size, and material for Plunger Pump KQZ1000.

The model name and any nameplate data should be the first line of the inquiry for Plunger Pump KQZ1000.
Add the part name, size, and a photo for Plunger Pump KQZ1000 if the old part is still available.
If you have them, send dimensions, material preferences, and a sample photo to keep the request aligned with Plunger Pump KQZ1000 and intermittent oil well operations such as acidizing, cementing, and fracturing.
Send Plunger Pump KQZ1000's model name, serial number, plunger size, pressure window, and medium condition before quoting the parts.

Request checklist

When the part for Plunger Pump KQZ1000 is tied to intermittent oil well operations such as acidizing, cementing, and fracturing, add the measured sample and any plunger-size or pressure note at the same time.

Inquiry & Support

The support note closes the inquiry for Plunger Pump KQZ1000 without leaving shipping or confirmation questions open.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

The shipping plan only becomes useful after the size and material details are fixed for this plunger part.

Packing for Plunger Pump KQZ1000 can be adjusted to the order size and shipping route once the replacement set is confirmed.
Delivery timing for Plunger Pump KQZ1000 is best fixed only after the model, size, and material points are clear.
If the old sample or nameplate data for Plunger Pump KQZ1000 is incomplete, ask for technical confirmation before the order is placed.

Related Parts

Related pages help the buyer check sibling models inside the same branch without losing the current model reference.

Parts on the same unit

plungerlinerpacking setvalve seatvalve insertgasket kit

Related support items

seal kitfastener kitguide sleeve

Series-level spare parts

Keep the Plunger Pump Series spare-parts path connected to the model, series, and support pages.

Model