CO2 Injection Plunger Pump 5RC Spare Parts

Part Overview

The opening note keeps CO2 Injection Plunger Pump 5RC aligned with the documented CO2 Injection Pump replacement path.

CO2 Injection Plunger Pump 5RC stays on the same model record as the main product page, so the buyer can keep the spare-part check tied to the exact unit.
The fluid end view matters here because the fit decision usually starts where the wear path actually sits.
Why it matters: plunger size, sealing, and pressure retention depend on the correct plunger part.

Scope note

CO2 Injection Plunger Pump 5RC needs extra attention on sealing materials and pressure class.

Compatibility / Model Fit

Use the model, series, and sample check to confirm whether CO2 Injection Plunger Pump 5RC is the right match.

Compatible model: CO2 Injection Plunger Pump 5RC is the first reference point for the fit check, not the generic family name.
Compatible series: the series label is only the first step; the actual fit still comes from the measured part and the recorded duty path.
Interchangeable models: CO2 service for CO2 Injection Plunger Pump 5RC needs the low-temperature seal path and pressure class checked before a nearby model is accepted.
Confirm the pressure class, low-temperature media, and sealing arrangement on CO2 Injection Plunger Pump 5RC before treating the part as interchangeable.

Compatibility reminders

Compatible models: CO2 Injection Plunger Pump 5RC is the primary reference.
Compatible series: CO2 Injection Plunger Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: CO2 service for CO2 Injection Plunger Pump 5RC needs the low-temperature seal path and pressure class checked before a nearby model is accepted.
Partial compatibility: for CO2 Injection Plunger Pump 5RC, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

The category note helps the buyer decide whether the item is a wear part or a support part.

Part category: Low-Temperature Seal Package keeps CO2 Injection Plunger Pump 5RC tied to the fluid end service path.
The fluid end interface is the first place to verify the fit path for this spare part on CO2 Injection Plunger Pump 5RC.
Wear part or non-wear part: confirm whether the item belongs to the wear path for CO2 Injection Plunger Pump 5RC before the order is placed.
Priority path: start with the sealing and wear items for CO2 Injection Plunger Pump 5RC, then confirm the support pieces if needed.

Priority note

For CO2 Injection Plunger Pump 5RC in CO2 Injection Pump, the wear package usually gets checked first because it affects sealing and service life.

Material / Specification Notes

Size, material, finish, and interface details should stay visible for CO2 Injection Plunger Pump 5RC.

Size: confirm the exact size, bore, thread, or envelope from the removed sample or the source document.
Material: match the requested material to the working medium, wear level, and service environment.
Hardness / finish: use any supplied heat-treatment or surface-finish note as part of the replacement check.
Connection / interface: confirm flange face, bolt pattern, shaft fit, sealing groove, or fluid-end interface before purchase.

Service note

CO2 Injection Plunger Pump 5RC tends to care more about sealing margin, temperature behavior, and material stability than a plain duty pump.

Spare Parts Parameter Matrix

This table only uses source-backed model data for CO2 Injection Plunger Pump 5RC. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	CO2 Injection Plunger Pump 5RC	-	-	-	Corrosion-resistant	-	-	CO2 Injection Plunger Pump 5RC
Plunger (2")	CO2 Injection Plunger Pump 5RC	-	2"	-	-	-	-	CO2 Injection Plunger Pump 5RC
Plunger	CO2 Injection Plunger Pump 5RC	-	2"	5RC CO₂ injection plunger pump is a five-cylinder high-pressure pump for large-scale CO₂...	Corrosion-resistant	-	-	CO2 Injection Plunger Pump 5RC

Common Replacement Set

This section helps buyers plan the spare-parts order as a service set, not a loose item list.

Wear items

seal kit
packing set
valve seat
valve insert
plunger
gasket kit

Support items

fastener kit
pressure fitting
backup seal

The wear path on CO2 Injection Plunger Pump 5RC usually links the main wear items, so they are often checked as a set.
Keep the sealing parts, wear parts, and backup hardware for CO2 Injection Plunger Pump 5RC in one service check.
Plan the maintenance window around the replacement set for CO2 Injection Plunger Pump 5RC rather than a single isolated item.

Maintenance planning

CO2 Injection Plunger Pump 5RC needs extra attention on sealing materials and pressure class.

When ordering parts for CO2 Injection Plunger Pump 5RC, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The order note keeps the request specific enough for the parts team to confirm the fit first.

Send the exact model name for CO2 Injection Plunger Pump 5RC and any available nameplate data.
Add the part name, size, and a photo for CO2 Injection Plunger Pump 5RC if the old part is still available.
If available, add dimensions, material notes, and a sample photo so the request stays tied to CO2 Injection Plunger Pump 5RC and the working medium and duty point.
Provide CO2 Injection Plunger Pump 5RC's model name, medium condition, serial number, and any temperature notes before the part set is matched.

Request checklist

When the part for CO2 Injection Plunger Pump 5RC is tied to the working duty point, add the measured sample and any plunger-size or pressure note at the same time.

Inquiry & Support

The support note closes the inquiry for CO2 Injection Plunger Pump 5RC without leaving shipping or confirmation questions open.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

Once the fit questions are settled, the shipment plan can be matched to CO2 Injection Plunger Pump 5RC's pump-end parts set.

Packing for CO2 Injection Plunger Pump 5RC can be arranged for export shipment according to the final order size and destination.
Delivery timing for CO2 Injection Plunger Pump 5RC should be confirmed after the model, size, and material questions are settled.
When the sample or nameplate data for CO2 Injection Plunger Pump 5RC is incomplete, technical confirmation should happen before purchase.

Related Parts

This related block keeps close spare-parts pages one step away for side-by-side comparison on CO2 Injection Plunger Pump 5RC.

Parts on the same unit

seal kitpacking setvalve seatvalve insertplungergasket kit

Related support items

fastener kitpressure fittingbackup seal

Series-level spare parts

Next Pages

Keep the CO2 Injection Plunger Pump Series spare-parts path connected to the model, series, and support pages.

Model