CO2 Injection Plunger Pump 3RC Spare Parts

Part Overview

The page introduction keeps the fluid end service context visible for CO2 Injection Plunger Pump 3RC.

The spare-parts notes for CO2 Injection Plunger Pump 3RC are written around the documented model and the part group actually used on that unit.
This page keeps the fluid end side visible because that is the area most buyers check first when a part needs replacement.
Why it matters: the wrong plunger part can reduce sealing life and shorten the service window.

Scope note

CO2 Injection Plunger Pump 3RC needs extra attention on sealing materials and pressure class.

Compatibility / Model Fit

The fit review stays focused on CO2 Injection Plunger Pump 3RC, the removed part, and the actual interface points.

Compatible model: start with CO2 Injection Plunger Pump 3RC and confirm the removed sample against the source record before ordering.
Compatible series: CO2 Injection Plunger Pump Series helps narrow the family, but the final size check still has to match the part in hand.
Interchangeable models: a CO2 replacement for CO2 Injection Plunger Pump 3RC only works when the seal package, temperature behavior, and pressure rating match.
Confirm the pressure class, low-temperature media, and sealing arrangement on CO2 Injection Plunger Pump 3RC before treating the part as interchangeable.

Compatibility reminders

Compatible models: CO2 Injection Plunger Pump 3RC is the primary reference.
Compatible series: CO2 Injection Plunger Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: a CO2 replacement for CO2 Injection Plunger Pump 3RC only works when the seal package, temperature behavior, and pressure rating match.
Partial compatibility: for CO2 Injection Plunger Pump 3RC, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

Use the category note to separate fluid end items from the supporting hardware.

Part category: this Low-Temperature Seal Package label helps separate the active wear set from the support hardware on CO2 Injection Plunger Pump 3RC.
Pump domain: Fluid End for CO2 Injection Plunger Pump 3RC.
Wear part or non-wear part: the order should separate consumable wear items from supporting hardware on CO2 Injection Plunger Pump 3RC.
Priority path: start with the sealing and wear items for CO2 Injection Plunger Pump 3RC, then confirm the support pieces if needed.

Priority note

On CO2 Injection Plunger Pump 3RC, the seal and wear path normally deserves the first review before backup parts are added.

Material / Specification Notes

The specification note keeps the replacement request tied to the sample and the source record.

Size: the dimensions should be checked from the sample, drawing, or source document rather than assumed from the model name alone.
Material: the material choice should follow the duty condition, not just the visible part shape.
Hardness / finish: if the source material gives a hardness or finish value, keep that detail tied to the spare-part request.
Connection / interface: the flange face, bolt pattern, shaft fit, sealing groove, or fluid-end interface should be checked before ordering.

Service note

CO2 Injection Plunger Pump 3RC tends to care more about sealing margin, temperature behavior, and material stability than a plain duty pump.

Spare Parts Parameter Matrix

This table only uses source-backed model data for CO2 Injection Plunger Pump 3RC. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	CO2 Injection Plunger Pump 3RC	-	-	-	Corrosion-resistant	-	-	CO2 Injection Plunger Pump 3RC
Plunger (2")	CO2 Injection Plunger Pump 3RC	-	2"	-	-	-	-	CO2 Injection Plunger Pump 3RC
Plunger	CO2 Injection Plunger Pump 3RC	-	2"	3RC CO₂ injection plunger pump is a three-cylinder high-pressure pump for carbon dioxide...	Corrosion-resistant	-	-	CO2 Injection Plunger Pump 3RC

Common Replacement Set

This section helps buyers plan the spare-parts order as a service set, not a loose item list.

Wear items

seal kit
packing set
valve seat
valve insert
plunger
gasket kit

Support items

fastener kit
pressure fitting
backup seal

These parts on CO2 Injection Plunger Pump 3RC move through the same wear path, which is why they are often quoted together.
Keep the sealing parts, wear parts, and backup hardware for CO2 Injection Plunger Pump 3RC in one service check.
Plan the maintenance window around the replacement set for CO2 Injection Plunger Pump 3RC rather than a single isolated item.

Maintenance planning

CO2 Injection Plunger Pump 3RC needs extra attention on sealing materials and pressure class.

The spare-parts set for CO2 Injection Plunger Pump 3RC is easier to plan when the wear items and support items are checked as one bundle.

Ordering Information

Send enough detail to match the sample, size, and material for CO2 Injection Plunger Pump 3RC.

Send the exact model name for CO2 Injection Plunger Pump 3RC and any available nameplate data.
State the part name and size for CO2 Injection Plunger Pump 3RC, and include an image if the old item can still be compared.
If available, add dimensions, material notes, and a sample photo so the request stays tied to CO2 Injection Plunger Pump 3RC and the working medium and duty point.
Provide CO2 Injection Plunger Pump 3RC's model name, medium condition, serial number, and any temperature notes before the part set is matched.

Request checklist

The parts team can work faster on CO2 Injection Plunger Pump 3RC when the model, serial number, part name, sealing detail, photos, dimensions, and material note are sent together.

Inquiry & Support

The support note closes the inquiry for CO2 Injection Plunger Pump 3RC without leaving shipping or confirmation questions open.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

Packing and delivery for CO2 Injection Plunger Pump 3RC should wait until the plunger size and sealing points are clear.

Packing for CO2 Injection Plunger Pump 3RC can be adjusted to the order size and shipping route once the replacement set is confirmed.
Delivery timing for CO2 Injection Plunger Pump 3RC is best fixed only after the model, size, and material points are clear.
If the old sample or nameplate data for CO2 Injection Plunger Pump 3RC is incomplete, ask for technical confirmation before the order is placed.

Related Parts

Use nearby spare-parts pages to compare CO2 Injection Plunger Pump 3RC with close family matches before ordering.

Parts on the same unit

seal kitpacking setvalve seatvalve insertplungergasket kit

Related support items

fastener kitpressure fittingbackup seal

Series-level spare parts

Next Pages

Keep the CO2 Injection Plunger Pump Series spare-parts path connected to the model, series, and support pages.

Model