Model Detail
SeriesSand Pump Series ModelSand-Pump-Custom Applicationsdelivering sand-containing media in fracturing, cementing, well washing operations
Sand Pump Custom
Sand Pump Custom: used for delivering sand-containing media in fracturing, cementing, well washing operations
Product Overview
Sand Pump Custom is presented using the supplied product text, model data, and service context.
Custom sand pump is supporting equipment for oilfield sand mixing and slurry transfer. It is used for delivering sand-containing media in fracturing, cementing and well washing operations.
It is positioned for delivering sand-containing media in fracturing, cementing, and well washing operations. The technical description also points to compact footprint.
The main-spec block adds another anchor through Rated Power is listed as 75~160 kW and Pump Stage is listed as Single Stage.
Model Focus
- Series family: Sand Pump Series
- Model record: keep the page tied to the supplied table and series page.
- Configuration: confirm the installation envelope before release.
- Primary use: delivering sand-containing media in fracturing
- Feature focus: compact footprint
Key Structural Features
Sand Pump Custom emphasizes compact footprint in the source feature notes.
The feature notes emphasize compact footprint.
A compact footprint gives Sand Pump Custom more room to fit into tighter service layouts.
The extracted feature list keeps Sand Pump Custom grounded in Wear-resistant flow passage, hardened impeller and volute, and mechanical seal.
Reading the structure alongside Rated Power is listed as 75~160 kW and Pump Stage is listed as Single Stage keeps the page closer to the source file.
- Wear-resistant flow passage
- hardened impeller and volute
- mechanical seal
- compact skid structure
- suitable for abrasive medium.
What the layout emphasizes
- Theme focus: compact footprint
- Feature note: Wear-resistant flow passage
- Feature note: hardened impeller and volute
Application Areas
The service notes for Sand Pump Custom stay centered on delivering sand-containing media in fracturing, cementing, and well washing operations.
The source document lists delivering sand-containing media in fracturing, cementing, and well washing operations as the core service areas for Sand Pump Custom.
That scope matters because it keeps the page focused on the real duty point instead of turning Sand Pump Custom into a generic pump description.
The application discussion is easier to place beside Rated Power = 75~160 kW and Pump Stage = Single Stage.
delivering sand-containing media in fracturingcementingwell washing operations
Service focus
- Primary use: delivering sand-containing media in fracturing
- Application note: cementing
- Application note: well washing operations
Selection / Configuration Notes
Check duty point, package fit, and operating margin before locking Sand Pump Custom.
Sand Pump Custom is listed for delivering sand-containing media in fracturing, cementing, and well washing operations, so the final package should stay matched to that duty set.
The layout details for Sand Pump Custom emphasize compact footprint, which should stay intact when the model is specified.
Reading Sand Pump Custom against Rated Power = 75~160 kW and Pump Stage = Single Stage helps keep the selection grounded in the table.
The model becomes easier to place when the selection notes are read against Rated Power is listed as 75~160 kW, Pump Stage is listed as Single Stage, and Structural Form is listed as Horizontal Centrifugal Sand Pump.
Before ordering
- Confirm the duty point against the table and the installation envelope for Sand Pump Custom.
- Review duty point, package fit, and operating margin together with the installation envelope.
- Keep the medium and connection path consistent with the selected package.
- Primary use: delivering sand-containing media in fracturing
- Rated Power: 75~160 kW
- Pump Stage: Single Stage
Practical Model Check
Sand Pump Series should be read together with the table and the duty point.
If you need the best-fit model for Sand Pump Series, send the model name, required duty point, and any connection constraints.
The family may stay close, but the final model should change if the operating fit is off.
Quick check
- Series family: Sand Pump Series
- Selection focus: duty point, package fit, and operating margin
- Use the parameter table before quotation and keep the operating margin visible.
- Confirm the working medium, duty cycle, and connection path.
Product Parameters
| Main Technical Specifications | |
|---|---|
| Rated Power | 75~160 kW |
| Pump Stage | Single Stage |
| Structural Form | Horizontal Centrifugal Sand Pump |
| Applicable Medium | Sand Slurry, Cement Slurry, Fracturing Fluid |
Operating Parameters
| Parameter Item | Technical Data |
|---|---|
| Max Working Pressure | 1.6 MPa |
| Rated Displacement | 50~160 m³/h |
| Rated Rotating Speed | 1450/2900 r/min |
| Operating Temperature Range | -20℃ ~ 80℃ |
| Continuous Operating Time | ≥72 h |
Inquiry Path
Reduce friction and keep the CTA visible.
If you need the best-fit model for Sand Pump Series, send the model name, required duty point, and any connection constraints.
Contact
PHONE:+86-13062870081
EMAIL:sales@sjpetroleummachinery.com
ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China
Related Models
Keep the comparison close to this model family.
Next Pages
Move from the exact Sand Pump Series model to the pages that support the buying decision.
Series
Sand Pump Series
Go back to the Sand Pump Series family and compare sibling model tables.
Open seriesSpare Parts
Sand Pump Custom spare parts
Open the spare-parts path for Sand Pump Custom to review replacement notes.
Open spare partsGuide
Selection Guide
Use this guide when duty point, fit window, and connection path still need a final check.
Open guideGuide
FAQ
Use the quick answers when the inquiry needs a fast first pass.
Open guide