Piston Pump KTN500 Spare Parts

Part Overview

Piston Pump KTN500 stays tied to Plunger / Piston Pump service and the exact model record.

Piston Pump KTN500 uses the same source file, model family, and inquiry path, which keeps the spare-part review anchored to the right pump.
This page keeps the fluid end side visible because that is the area most buyers check first when a part needs replacement.
Why it matters: a plunger replacement only works when the size and pressure path are matched.

Scope note

Piston Pump KTN500 needs the wear kit checked against the exact size and duty point on the removed sample.

Compatibility / Model Fit

Piston Pump Series helps narrow the fit check, but the final match still depends on the sample and dimensions.

Compatible model: start with Piston Pump KTN500 and confirm the removed sample against the source record before ordering.
Compatible series: use Piston Pump Series and the Fluid End Wear Package note as the search filter, then verify the sample and nameplate data.
Interchangeable models: for Piston Pump KTN500, the final call depends on size, pressure window, and the fluid-end path.
Check pressure class, plunger size, and fluid-end layout on Piston Pump KTN500 before assuming partial interchangeability.

Compatibility reminders

Compatible models: Piston Pump KTN500 is the primary reference.
Compatible series: Piston Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: for Piston Pump KTN500, the final call depends on size, pressure window, and the fluid-end path.
Partial compatibility: for Piston Pump KTN500, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

The category note helps the buyer decide whether the item is a wear part or a support part.

Part category: this Fluid End Wear Package label helps separate the active wear set from the support hardware on Piston Pump KTN500.
Use the fluid end side of the machine as the main reference for the replacement check on Piston Pump KTN500.
Wear part or non-wear part: confirm whether the item belongs to the wear path for Piston Pump KTN500 before the order is placed.
Priority path: start with the sealing and wear items for Piston Pump KTN500, then confirm the support pieces if needed.

Priority note

On Piston Pump KTN500, the seal and wear path normally deserves the first review before backup parts are added.

Material / Specification Notes

Size, material, finish, and interface details should stay visible for Piston Pump KTN500.

Size: the dimensions should be checked from the sample, drawing, or source document rather than assumed from the model name alone.
Material: the material choice should follow the duty condition, not just the visible part shape.
Hardness / finish: if the source material gives a hardness or finish value, keep that detail tied to the spare-part request.
Connection / interface: compare the flange, bolt pattern, fit point, and sealing path against the fluid-end interface before purchase.

Service note

Piston Pump KTN500 depends on wear resistance, sealing stability, and dimensional fit at the fluid end.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Piston Pump KTN500. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Piston Pump KTN500	-	96.06" x 66.93" x 40.4"	Power: 500 hp (380 kW); Strokes: 160 rpm; Rod load: 54,000 lbf (240 KN); Stroke: 8" (203.2 mm); Gear ratio: 5.6191: 1	Alloy steel	-	-	Piston Pump KTN500
Piston (100 mm)	Piston Pump KTN500	-	100 mm	-	-	-	-	Piston Pump KTN500
Piston (110 mm)	Piston Pump KTN500	-	110 mm	-	-	-	-	Piston Pump KTN500
Piston (120 mm)	Piston Pump KTN500	-	120 mm	-	-	-	-	Piston Pump KTN500
Piston (130 mm ...)	Piston Pump KTN500	-	130 mm ...	-	-	-	-	Piston Pump KTN500
Piston	Piston Pump KTN500	-	100 mm / 110 mm / 120 mm / 130 mm ...	Piston Pump KTN500: modular service-friendly layout; multiple size options for pressure and...	Alloy steel	-	-	Piston Pump KTN500

Common Replacement Set

The common set note keeps the replacement bundle close to the maintenance window.

Wear items

plunger
liner
packing set
valve seat
valve insert
gasket kit

Support items

seal kit
fastener kit
guide sleeve

The wear path on Piston Pump KTN500 usually links the main wear items, so they are often checked as a set.
Review the sealing parts and backup hardware for Piston Pump KTN500 in the same maintenance pass as the wear items.
Plan the maintenance window around the replacement set for Piston Pump KTN500 rather than a single isolated item.

Maintenance planning

Piston Pump KTN500 needs the wear kit checked against the exact size and duty point on the removed sample.

For Piston Pump KTN500, the wear set is usually reviewed together with the backup pieces before the maintenance window is fixed.

Ordering Information

The order note keeps the request specific enough for the parts team to confirm the fit first.

Send the exact model name for Piston Pump KTN500 and any available nameplate data.
State the part name and size for Piston Pump KTN500, and include an image if the old item can still be compared.
If available, add dimensions, material requests, and a sample photo of the removed part for Piston Pump KTN500 and the working medium and duty point.
Send Piston Pump KTN500's model name, serial number, plunger size, pressure window, and medium condition before quoting the parts.

Request checklist

The parts team can work faster on Piston Pump KTN500 when the model, serial number, part name, sealing detail, photos, dimensions, and material note are sent together.

Inquiry & Support

The support note closes the inquiry for Piston Pump KTN500 without leaving shipping or confirmation questions open.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

The shipping plan only becomes useful after the size and material details are fixed for this plunger part.

Packing for Piston Pump KTN500 can be adjusted to the order size and shipping route once the replacement set is confirmed.
Delivery timing for Piston Pump KTN500 is best fixed only after the model, size, and material points are clear.
When the sample or nameplate data for Piston Pump KTN500 is incomplete, technical confirmation should happen before purchase.

Related Parts

This related block keeps close spare-parts pages one step away for side-by-side comparison on Piston Pump KTN500.

Parts on the same unit

plungerlinerpacking setvalve seatvalve insertgasket kit

Related support items

seal kitfastener kitguide sleeve

Series-level spare parts

Next Pages

Keep the Piston Pump Series spare-parts path connected to the model, series, and support pages.

Model