Old Triplex Plunger Pump CK PG05 300 Spare Parts

Part Overview

The opening note keeps Old Triplex Plunger Pump CK PG05 300 aligned with the documented Plunger / Piston Pump replacement path.

The spare-parts notes for Old Triplex Plunger Pump CK PG05 300 are written around the documented model and the part group actually used on that unit.
The fluid end view matters here because the fit decision usually starts where the wear path actually sits.
Why it matters: a plunger replacement only works when the size and pressure path are matched.

Scope note

Old Triplex Plunger Pump CK PG05 300 needs the wear kit checked against the exact size and duty point on the removed sample.

Compatibility / Model Fit

The fit review stays focused on Old Triplex Plunger Pump CK PG05 300, the removed part, and the actual interface points.

Compatible model: Old Triplex Plunger Pump CK PG05 300 is the first reference point for the fit check, not the generic family name.
Compatible series: the series label is only the first step; the actual fit still comes from the measured part and the recorded duty path.
Interchangeable models: a plunger or piston swap on Old Triplex Plunger Pump CK PG05 300 still needs the fluid-end layout and size to line up with the sample.
Check pressure class, plunger size, and fluid-end layout on Old Triplex Plunger Pump CK PG05 300 before assuming partial interchangeability.

Compatibility reminders

Compatible models: Old Triplex Plunger Pump CK PG05 300 is the primary reference.
Compatible series: Old Triplex Plunger Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: a plunger or piston swap on Old Triplex Plunger Pump CK PG05 300 still needs the fluid-end layout and size to line up with the sample.
Partial compatibility: for Old Triplex Plunger Pump CK PG05 300, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

The category note helps the buyer decide whether the item is a wear part or a support part.

Part category: this Fluid End Wear Package label helps separate the active wear set from the support hardware on Old Triplex Plunger Pump CK PG05 300.
The fluid end interface is the first place to verify the fit path for this spare part on Old Triplex Plunger Pump CK PG05 300.
Wear part or non-wear part: confirm whether the item belongs to the wear path for Old Triplex Plunger Pump CK PG05 300 before the order is placed.
Priority path: start with the sealing and wear items for Old Triplex Plunger Pump CK PG05 300, then confirm the support pieces if needed.

Priority note

On Old Triplex Plunger Pump CK PG05 300, the seal and wear path normally deserves the first review before backup parts are added.

Material / Specification Notes

Size, material, finish, and interface details should stay visible for Old Triplex Plunger Pump CK PG05 300.

Size: confirm the exact size, bore, thread, or envelope from the removed sample or the source document.
Material: keep the replacement material aligned with the medium, wear load, and expected service window.
Hardness / finish: use any supplied heat-treatment or surface-finish note as part of the replacement check.
Connection / interface: the flange face, bolt pattern, shaft fit, sealing groove, or fluid-end interface should be checked before ordering.

Service note

Old Triplex Plunger Pump CK PG05 300 depends on wear resistance, sealing stability, and dimensional fit at the fluid end.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Old Triplex Plunger Pump CK PG05 300. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Old Triplex Plunger Pump CK PG05 300	-	-	-	-	-	-	Old Triplex Plunger Pump CK PG05 300
Plunger	Old Triplex Plunger Pump CK PG05 300	-	-	-	-	-	-	Old Triplex Plunger Pump CK PG05 300

Common Replacement Set

Use the wear set and backup items as one planning unit for Old Triplex Plunger Pump CK PG05 300.

Wear items

plunger
liner
packing set
valve seat
valve insert
gasket kit

Support items

seal kit
fastener kit
guide sleeve

For Old Triplex Plunger Pump CK PG05 300, plunger and liner are often requested together because they share the same wear path.
Keep the sealing parts, wear parts, and backup hardware for Old Triplex Plunger Pump CK PG05 300 in one service check.
Use the replacement set for Old Triplex Plunger Pump CK PG05 300 as the starting point for the maintenance plan.

Maintenance planning

Old Triplex Plunger Pump CK PG05 300 needs the wear kit checked against the exact size and duty point on the removed sample.

When ordering parts for Old Triplex Plunger Pump CK PG05 300, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The inquiry should include the model, size, and sample evidence before quotation starts.

Send the exact model name for Old Triplex Plunger Pump CK PG05 300 and any available nameplate data.
Add the part name, dimensions, and a clear photo of the removed item for Old Triplex Plunger Pump CK PG05 300 if possible.
If available, add dimensions, material requests, and a sample photo of the removed part for Old Triplex Plunger Pump CK PG05 300 and the working medium and duty point.
Send Old Triplex Plunger Pump CK PG05 300's model name, serial number, plunger size, pressure window, and medium condition before quoting the parts.

Request checklist

The parts team can work faster on Old Triplex Plunger Pump CK PG05 300 when the model, serial number, part name, sealing detail, photos, dimensions, and material note are sent together.

Inquiry & Support

This support block keeps the shipping path tied to Old Triplex Plunger Pump CK PG05 300 instead of a generic family label.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

The shipping plan only becomes useful after the size and material details are fixed for this plunger part.

Packing for Old Triplex Plunger Pump CK PG05 300 can be adjusted to the order size and shipping route once the replacement set is confirmed.
The delivery window for Old Triplex Plunger Pump CK PG05 300 should be finalized after the fit and material questions are answered.
Ask for technical confirmation for Old Triplex Plunger Pump CK PG05 300 before placing the order if the old sample or nameplate data is incomplete.

Related Parts

Related pages help the buyer check sibling models inside the same branch without losing the current model reference.

Parts on the same unit

plungerlinerpacking setvalve seatvalve insertgasket kit

Related support items

seal kitfastener kitguide sleeve

Series-level spare parts

Next Pages

Keep the Old Triplex Plunger Pump Series spare-parts path connected to the model, series, and support pages.

Model