Model Detail
SeriesContinuous Duty Electric Fracturing Plunger Pump Series ModelContinuous-Duty-Electric-Fracturing-Plunger-Pump-SCF8000
Continuous Duty Electric Fracturing Plunger Pump SCF8000
Continuous Duty Electric Fracturing Plunger Pump SCF8000: SCF8000 continuous-duty electric fracturing plunger pump is new generation 8000HP seven-cylinder high-power electric fracturing pump for...
Product Overview
Continuous Duty Electric Fracturing Plunger Pump SCF8000 is introduced from the supplied model notes, parameters, and duty context.
SCF8000 continuous-duty electric fracturing plunger pump is new generation 8000HP seven-cylinder high-power electric fracturing pump for ultra-deep shale gas stimulation.
The supporting notes emphasize installation flexibility and stable long-run operation.
Reading the model page together with Rated Continuous Power is listed as 8000 HP and Cylinder Quantity is listed as 7 keeps the description grounded in the supplied data.
Model Focus
- Series family: Continuous Duty Electric Fracturing Plunger Pump Series
- Model record: keep the page tied to the supplied table and series page.
- Configuration: confirm the installation envelope before release.
- Primary use: confirm the duty point, medium, and service window.
- Feature focus: installation flexibility
- Feature focus: stable long-run operation
Key Structural Features
Continuous Duty Electric Fracturing Plunger Pump SCF8000 focuses on installation flexibility and stable long-run operation in the structural description.
The source material focuses on installation flexibility and stable long-run operation.
The installation-flexibility note matters because Continuous Duty Electric Fracturing Plunger Pump SCF8000 can be arranged to suit the available equipment space. The stable-operation note matters when Continuous Duty Electric Fracturing Plunger Pump SCF8000 has to stay consistent through longer runs.
The source wording for Continuous Duty Electric Fracturing Plunger Pump SCF8000 still centers on Seven-cylinder symmetric layout for ultra-low flow pulsation, super heavy-duty forged crankcase, and high-efficiency heat dissipation system.
The feature block and Rated Continuous Power is listed as 8000 HP and Cylinder Quantity is listed as 7 work together to show how the model is configured.
- Seven-cylinder symmetric layout for ultra-low flow pulsation
- super heavy-duty forged crankcase
- high-efficiency heat dissipation system
- full digital intelligent monitoring system.
What the layout emphasizes
- Theme focus: installation flexibility
- Theme focus: stable long-run operation
- Feature note: Seven-cylinder symmetric layout for ultra-low flow pulsation
- Feature note: super heavy-duty forged crankcase
Application Areas
Continuous Duty Electric Fracturing Plunger Pump SCF8000 keeps the application scope tied to the source document.
SCF8000 continuous-duty electric fracturing plunger pump is new generation 8000HP seven-cylinder high-power electric fracturing pump for ultra-deep shale gas stimulation.
Continuous Duty Electric Fracturing Plunger Pump SCF8000 is kept within the source document scope because no detailed application list was extracted.
The application discussion is easier to place beside Rated Continuous Power = 8000 HP and Cylinder Quantity = 7.
Service focus
- Service scope: Continuous Duty Electric Fracturing Plunger Pump Series
Selection / Configuration Notes
Check high pressure, sustained output, and manifold fit before locking Continuous Duty Electric Fracturing Plunger Pump SCF8000.
The layout details for Continuous Duty Electric Fracturing Plunger Pump SCF8000 emphasize installation flexibility and stable long-run operation, which should stay intact when the model is specified.
The specification rows for Continuous Duty Electric Fracturing Plunger Pump SCF8000 make the final package easier to validate through Rated Continuous Power = 8000 HP and Cylinder Quantity = 7.
The specification block gives an additional checkpoint through Rated Continuous Power is listed as 8000 HP, Cylinder Quantity is listed as 7, and Transmission Type is listed as Super High-efficiency Gear Drive.
The model choice for Continuous Duty Electric Fracturing Plunger Pump SCF8000 should be checked against the series family and the available operating data before quotation.
Before ordering
- Confirm the duty point against the table and the manifold path for Continuous Duty Electric Fracturing Plunger Pump SCF8000.
- Check manifold fit, sustained output, and pressure class before release.
- Verify the medium, service cycle, and flow path against the table.
- Series family: Continuous Duty Electric Fracturing Plunger Pump Series
- Rated Continuous Power: 8000 HP
- Cylinder Quantity: 7
Practical Model Check
Continuous Duty Electric Fracturing Plunger Pump Series should be read together with the table and the duty point.
If you need the best-fit model, send the model name, required duty point, and any manifold or pressure constraints.
The family may stay close, but the final model should change if the pressure path is off.
Quick check
- Series family: Continuous Duty Electric Fracturing Plunger Pump Series
- Selection focus: high pressure, sustained output, and manifold fit
- Use the parameter table before quotation and keep the manifold path visible.
- Confirm the pressure medium, duty cycle, and manifold path.
Product Parameters
| Main Technical Specifications | |
|---|---|
| Rated Continuous Power | 8000 HP |
| Cylinder Quantity | 7 |
| Transmission Type | Super High-efficiency Gear Drive |
| Structural Form | Horizontal Continuous-duty Septuplex |
| Applicable Medium | Ultra-high Pressure Fracturing Fluid |
Operating Parameters
| Parameter Item | Technical Data |
|---|---|
| Max Working Pressure | 130 MPa |
| Rated Displacement | 10.5~18.0 m³/min |
| Rated Rotating Speed | 120~210 r/min |
| Operating Temperature Range | -40℃ ~ 90℃ |
| Continuous Operating Time | ≥80 h |
Inquiry Path
Reduce friction and keep the CTA visible.
If you need the best-fit model, send the model name, required duty point, and any manifold or pressure constraints.
Contact
PHONE:+86-13062870081
EMAIL:sales@sjpetroleummachinery.com
ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China
Related Models
Compare nearby fracturing models inside the same family branch.
Continuous Duty Electric Fracturing Plunger Pump SCF6000
SCF6000 continuous-duty electric fracturing plunger pump is 6000HP continuous-duty electric pump for large-scale volume fracturing...
Continuous Duty Electric Fracturing Plunger Pump SCF5000
SCF5000 continuous-duty electric fracturing plunger pump is new generation continuous running 5000HP pump, peak power up to 8000HP...
Quintuplex Plunger Pump JR7000QP
JR7000QP quintuplex plunger pump is Jereh’s top 7000HP high-power fracturing pump, developed for ultra-deep shale and tight oil...
Triplex Plunger Pump JR600S
The JR600S triplex plunger pump is an upgraded optimized version of the JR600N pump, focusing on optimizing the on-site maintenance...
Next Pages
Move from the exact Continuous Duty Electric Fracturing Plunger Pump Series model to the pages that support the buying decision.
Series
Continuous Duty Electric Fracturing Plunger Pump Series
Go back to the fracturing family and compare sibling model tables.
Open seriesSpare Parts
Continuous Duty Electric Fracturing Plunger Pump SCF8000 spare parts
Open the fracturing spare-parts path for pressure-side wear items.
Open spare partsGuide
Selection Guide
Use this guide when pressure class, manifold fit, and output still need a final check.
Open guideGuide
FAQ
Use the quick answers when the inquiry needs a fast first pass on fracturing fit.
Open guide