Auxiliary Centrifugal Pump 32SB180J 100 Spare Parts

Part Overview

The opening note keeps Auxiliary Centrifugal Pump 32SB180J 100 aligned with the documented Centrifugal Pump replacement path.

Auxiliary Centrifugal Pump 32SB180J 100 stays on the same model record as the main product page, so the buyer can keep the spare-part check tied to the exact unit.
The page gives the power end / rotating assembly path priority so the buyer can compare the part against the correct machine side.
Why it matters: the buyer needs the part set to match the actual fit path, not just the family name.

Scope note

Rotating parts on Auxiliary Centrifugal Pump 32SB180J 100 usually need dimension checks before procurement.

Compatibility / Model Fit

Auxiliary Centrifugal Pump Series helps narrow the fit check, but the final match still depends on the sample and dimensions.

Compatible model: Auxiliary Centrifugal Pump 32SB180J 100 is the first reference point for the fit check, not the generic family name.
Compatible series: use Auxiliary Centrifugal Pump Series and the Rotating Assembly & Seal Package note as the search filter, then verify the sample and nameplate data.
Interchangeable models: a centrifugal replacement for Auxiliary Centrifugal Pump 32SB180J 100 only works after the rotating interface and seal space are checked together.
Confirm the casing arrangement, shaft diameter, and seal chamber on Auxiliary Centrifugal Pump 32SB180J 100 before treating the part as a direct fit.

Compatibility reminders

Compatible models: Auxiliary Centrifugal Pump 32SB180J 100 is the primary reference.
Compatible series: Auxiliary Centrifugal Pump Series can narrow the search, but the sample still decides the final fit.
Interchangeable models: a centrifugal replacement for Auxiliary Centrifugal Pump 32SB180J 100 only works after the rotating interface and seal space are checked together.
Partial compatibility: for Auxiliary Centrifugal Pump 32SB180J 100, some wear items may interchange while seals, gaskets, or hardware still need separate confirmation.

Part Category

This section keeps the replacement path grouped by wear role instead of by generic catalog labels.

Part category: use Rotating Assembly & Seal Package to keep the replacement path aligned with Auxiliary Centrifugal Pump Series and Auxiliary Centrifugal Pump 32SB180J 100.
Pump domain: Power End / Rotating Assembly for Auxiliary Centrifugal Pump 32SB180J 100.
Wear part or non-wear part: the order should separate consumable wear items from supporting hardware on Auxiliary Centrifugal Pump 32SB180J 100.
Priority path: start with the sealing and wear items for Auxiliary Centrifugal Pump 32SB180J 100, then confirm the support pieces if needed.

Priority note

For Auxiliary Centrifugal Pump 32SB180J 100 in Centrifugal Pump, the wear package usually gets checked first because it affects sealing and service life.

Material / Specification Notes

The specification note keeps the replacement request tied to the sample and the source record.

Size: the dimensions should be checked from the sample, drawing, or source document rather than assumed from the model name alone.
Material: the material choice should follow the duty condition, not just the visible part shape.
Hardness / finish: if a hardness value, surface finish, or heat treatment is supplied, keep it aligned with the replacement order.
Connection / interface: compare the flange, bolt pattern, fit point, and sealing path against the rotating interface before purchase.

Service note

Auxiliary Centrifugal Pump 32SB180J 100 depends on rotational balance, seal life, and wear resistance around the fluid path.

Spare Parts Parameter Matrix

This table only uses source-backed model data for Auxiliary Centrifugal Pump 32SB180J 100. Every row is built from explicit source text or main specification data; fields stay blank or use a dash when no concrete parameter is available.

Part / Component Name	Model	Part No. / Drawing No.	Size / Spec	Specification / Performance	Material	Hardness / Treatment	Connection / Interface	Compatible Model
Pump Assembly	Auxiliary Centrifugal Pump 32SB180J 100	-	-	-	Corrosion-resistant	-	-	Auxiliary Centrifugal Pump 32SB180J 100

Common Replacement Set

The common set note keeps the replacement bundle close to the maintenance window.

Wear items

impeller
mechanical seal
bearing
shaft sleeve
seal ring
gasket kit

Support items

coupling sleeve
seal kit
fastener kit

The wear path on Auxiliary Centrifugal Pump 32SB180J 100 usually links the main wear items, so they are often checked as a set.
Keep the sealing parts, wear parts, and backup hardware for Auxiliary Centrifugal Pump 32SB180J 100 in one service check.
Use the replacement set for Auxiliary Centrifugal Pump 32SB180J 100 as the starting point for the maintenance plan.

Maintenance planning

Rotating parts on Auxiliary Centrifugal Pump 32SB180J 100 usually need dimension checks before procurement.

When ordering parts for Auxiliary Centrifugal Pump 32SB180J 100, the replacement bundle should be reviewed as a service set rather than a loose list.

Ordering Information

The order note keeps the request specific enough for the parts team to confirm the fit first.

Send the exact model name for Auxiliary Centrifugal Pump 32SB180J 100 and any available nameplate data.
Add the part name, dimensions, and a clear photo of the removed item for Auxiliary Centrifugal Pump 32SB180J 100 if possible.
If you have them, send dimensions, material preferences, and a sample photo to keep the request aligned with Auxiliary Centrifugal Pump 32SB180J 100 and the working medium and duty point.
Send Auxiliary Centrifugal Pump 32SB180J 100's model name, shaft or seal dimensions, and a photo of the removed part before the order is finalized.

Request checklist

When the part for Auxiliary Centrifugal Pump 32SB180J 100 is tied to the working duty point, add the measured sample and any material note at the same time.

Inquiry & Support

Packing and technical confirmation for Auxiliary Centrifugal Pump 32SB180J 100 should be settled after the model and material details are clear.

PHONE:+86-13062870081

EMAIL:sales@sjpetroleummachinery.com

ADDRESS:Siji Road, Jingzhou District, Jingzhou City, Hubei Province, China

Packing and delivery

Packing and delivery for Auxiliary Centrifugal Pump 32SB180J 100 should wait until the model, size, and material points are clear.

Export packing for Auxiliary Centrifugal Pump 32SB180J 100 can be matched to the final order size after the part details are locked in.
Delivery timing for Auxiliary Centrifugal Pump 32SB180J 100 is best fixed only after the model, size, and material points are clear.
When the sample or nameplate data for Auxiliary Centrifugal Pump 32SB180J 100 is incomplete, technical confirmation should happen before purchase.

Related Parts

This related block keeps close spare-parts pages one step away for side-by-side comparison on Auxiliary Centrifugal Pump 32SB180J 100.

Parts on the same unit

impellermechanical sealbearingshaft sleeveseal ringgasket kit

Related support items

coupling sleeveseal kitfastener kit

Series-level spare parts

Next Pages

Keep the Auxiliary Centrifugal Pump Series spare-parts path connected to the model, series, and support pages.

Model